top of page
Construction Site
< Back

Drilled Shaft Inspection Class

Drilled Shaft Inspection Class

 Class Duration:

Three Days

 Class Price:


  • Written Exam Required

  • Proficiency Exam Required.

  • ​Open Book Exam.

  • Allowed up to 2.5 Hours to complete the Written Exam.

Class Manual Revision

Release 11, July 2020


Initial Qualification:

  • Pass Drilled Shaft Written exam

  • Pass Drilled Shaft Proficiency exam

  • Obtain on-site experience in which at least he/she has directly observed, inspected, and recorded the full installation of at least ten (10) shafts under the supervision of a CTQP qualified Drilled Shaft Inspector (DSI).

  • At least five (5) of the drilled shafts inspected shall be on shafts constructed using the wet method. The CTQP qualified DSI shall include a note in the first page of the Drilled Shaft Excavation log as evidence for the required experience, indicating the name of the trainee and stating the trainee has inspected the full installation of the shaft.

  • Trainees must confirm work experience when taking the CTQP Drilled Shaft Inspector Exam or report work experience through the CTQP website (IA Re-qualification Program).


  • Pass Drilled Shaft Written Exam

  • Written exam only, before expiration date.

Subject Matter:

  • Will familiarize the inspector with the terminology, equipment and process details pertaining to drilled shaft installation

  • Will provide the inspector with the knowledge and understanding of Foundation Plans, Standard Specifications (Section 455), related Specifications, and related details of the Construction Project Administration Manual

  • The course describes the inspector's role from step one of the Drilled Shaft Installation Plan to the final step of shaft installation and acceptance

  • The course includes a review of the equipment used for all drilled shaft installation including miscellaneous shafts, methods of installation (dry, wet, temporary casing, and permanent casing); pilot holes and test holes; slurry and slurry testing; shaft bottom inspection; reinforcing steel and it's placement; concrete placement (tremies and pumps); load tests; tolerance; QC guidelines; acceptance; and pay quantities (homework and problems are included).

Class Objective:

To prepare the inspector to monitor and document drilled shaft operations resulting in safe foundation installation per the Contract Documents.

 Class Schedule:

To register, download registration form, complete and email to:


Class Dates
Class Location
Class Address
February 23, 2023 - February 25, 2023
A&SW Consultants, Inc. - Sanford (Orlando)
5545 Benchmark Lane, Sanford, Florida 32773
March 6, 2023 - March 8, 2023
Four Points by Sheraton - Jacksonville
8520 Baymeadows Road, Jacksonville, Florida 32256
March 29, 2023 - March 31, 2023
Hampton Inn - Miramar (Ft. Lauderdale)
10990 Marks Way, Miramar, Florida 33025
April 27, 2023 - April 29, 2023
A&SW Consultants, Inc. - Sanford (Orlando)
5545 Benchmark Lane, Sanford, Florida 32773
May 8, 2023 - May 10, 2023
Hampton Inn - Tampa
5628 West Waters Avenue, Tampa, Florida 33634

class price includes exam(s)

 Exam Requirements:

bottom of page